Concrete Nivelant

Name: Concrete Nivelant
SKU: 682
Availability: InStock

Price range: $29.92 through $147.50

**Provide 500 ml of additional Primer per container of leveler**

Ceramic Joint Concrete Leveler should be used on ceramic to fill joints before starting the project, or on an uneven surface to achieve a smooth surface.

– Apply the Primer (2 coats on porous surface) then one or two coats of leveler with a trowel to obtain a smooth surface. Let dry 12h to 24h

Surface: All surfaces: (Walls, counter, shower, floor, furniture, fireplace*)
Pot life: 3h Close the boiler between uses
Drying time between coats: 30 min to 2h (accelerate with a fan)
Number of layers: 2 layers
Tools required: Boiler of minimum 7 liters, mixer on drill, stick for scraping walls, smoother or trowel
Time before proceeding to the other step: 12h to 24h (next day)

Interior/Exterior

The Art Béton leveler is used to level irregular surfaces, such as ceramics, before the application of the Concrete coating.

– Follow the 4 regular steps starting with the Primer

Format

Clear

- +

SKU: N/A Category: Products

SURFACE PREPARATION

Make sure that each tile or surface to be covered is stable. Clean with TSP if necessary, let dry. Apply Roller Primer in one coat. Use a brush to cover the corners. Leave to dry until a translucent film is obtained before applying the leveler. Speed up drying with a fan.

CONCRETE LEVELER PREPARATION

Put the leveling agent in a suitable boiler, add the water, then mix using a mixer to obtain a homogeneous paste.

CONCRETE LEVELER APPLICATION

Apply a coat with a trowel or trowel to fill the ceramic joints. When the first coat is partially dry (30 min to 2 hours), apply a second coat to level the surface. Allow to dry completely, 12 to 24 hours, before proceeding to Step 1 of the application of Art Béton products. Speed up drying with a fan.
*** The leveler hardens in less than 3 hours following mixing in the boiler ***

FINISHING

After drying for 12 to 24 hours, lightly sand the leveler with 80 grit sandpaper if necessary. You must apply the Art Béton Primer to the leveled surfaces for maximum adhesion of the Art Béton Coating. Follow the instructions for steps 1 to 4 provided by Art Béton for the rest of the procedures.
CLEANING: Clean the instruments with water or neutral soap when the leveler is still fresh.

WARRANTY

- Les Enduits Art Béton offers a guarantee for its Art Béton coating system. The warranty is applicable for one year from the date of purchase of the system. Les Enduits Art Béton undertakes to replace the products used if, and only if, the application is made in strict accordance with the attached specifications and on a perfectly stable basis.
- Shelf life: 1 year after purchase
- Protect products from freezing at all times

*ARTBÉTON COATING IS NON-FLAMABLE. FOR USE ON A FIREPLACE DECOR WALL, IT MUST BE APPLIED OVER FIBER CEMENT OR ANY OTHER NON-FLAMABLE MATERIAL.

COMPLETE INSTALLATION GUIDE (PDF)

PRICE PER SQUARE FOOT FOR PROJECT

YOU ARE AT STEP 2! 🙂

STEP 1 – PRIMER STEP 3 – SEALANTS STEP 4 – VARNISH