SURFACE PREPARATION: Surfaces must have been covered with the sealer (Step 3) and be completely dry. Clean the surfaces by removing any dust using a vacuum cleaner or a damp cloth.
APPLICATION: Step 4 Apply the varnish using a foam or microfiber roller, use a brush for corners and edges. Apply an even coat, without excess and without bubbles. Leave to dry completely, 1 hour to 3 hours.
Lightly sand between layers by hand, using 220 grit paper for a very smooth finish. Clean the surface thoroughly to remove any residue with a dry cloth. Apply the 2nd coat evenly.
CLEANING THE TOOLS: Use water or neutral soap to clean the tools when the product is still fresh. Dispose of the product in accordance with the regulations in force.
SURFACE CARE: For the first week, use only a dry microfiber cloth or mop. Then use a damp microfiber cloth or mop or a neutral soap.
STORAGE: Product is flammable and should be stored in a dry, temperature controlled area. The product will keep for about a year if it has not been opened.
INGREDIENTS: Water, polymer resin, propylene-based glycol ethers, silica derivative and surfactants.
- Shelf life: 1 year after purchase
- Protect products from freezing at all times
*ARTBÉTON COATING IS NON-FLAMABLE. FOR USE ON A FIREPLACE DECOR WALL, IT MUST BE APPLIED OVER FIBER CEMENT OR ANY OTHER NON-FLAMABLE MATERIAL.
YOU ARE AT STEP 4! 🙂
STEP 1 – PRIMER STEP 2 – COATING STEP 3 – SEALANTS
Reviews
There are no reviews yet.