Surface: Wall, Counter, Furniture, Cabinet, Firewall*, Floor
Coverage: 140 ft2 (1 L)
Drying time between coats: 1h to 3 hours. (accelerate with a fan)
Number of coats: 2 to 3 coats
Tools: Brush, foam roller, paint tray, 150 and 320 grit sandpaper
CLEANING TOOLS: Water while the product is still fresh
Walk over carefully: 24h
Fully dry: 7 days
The Art Béton water-based varnish is designed to be applied on the Art Béton Coating. It enhances colours, maintains the surface’s natural look and protects from water and oil. Ideal for concrete floors, walls, counters, and furniture. The varnish must be applied on the Sealer or the Impregnator Sealer.
SURFACE PREPARATION: Surfaces must have been covered by the Sealer or the Impregnator Sealer (Step 3) and be totally dry. Free the surfaces of any dust using a vacuum or a damp cloth.
APPLICATION: Apply the Varnish using a foam roller, use a paint brush for corners and edges. Apply a uniform layer, avoid streaks or bubbles. Let it dry completely (1 to 3 hours). Use a fan to accelerate curing time. Sand lightly between layers using a 150-grit sandpaper, then use a 320- grit sandpaper for a smooth fi nish. Clean the surface to get rid of any particles using a damp cloth or a vacuum. Apply the second layer uniformly. For the floors, avoid walking on them for the first 24 hours.
Completely dry after 7 to 30 days.
CLEANING TOOLS: with water or neutral soap while the product is still fresh.
SURFACE CLEANING: For the first week, use only dry microfiber mop or cloth. After, use a damp microfiber mop or cloth or with a neutral soap.
STORAGE: The product is flammable and must be stored in a dry place with controlled temperature. The product will keep for about a year if it has not been opened.
INGREDIENTS: Water, polymer resin, propylene glycol ethers, silica derivative and surfactants.
*ARTBÉTON COATING IS FLAME-RESISTANT. FOR USE ON A FIREPLACE WALL, IT MUST BE APPLIED TO FIBROCEMENT OR ANY OTHER FLAME-RESISTANT MATERIAL.