Arises practically everywhere!

Water-based sealer

SEALER FOR WALL
OR SUPERIEUR SEALER(IMPREGNATOR) FOR COUNTER, FURNITURE AND FLOOR
SEALER (Step 3)

Surface: All surfaces except shower and exterior (impregnator sealer needed)
Wall, furniture and fireplace*, counter, cabinet, table and floor
Coverage: 150 ft2 to 200 ft2 (1 L)
Number of coats: 1 coat
Tools: Brush, foam roller, paint tray
Time before the next step:: 1h to 3h (speed up with a fan)

Indoor

The Art Béton water-based sealer is designed to be applied on the Art Béton Coating. It is the fi rst step of concrete sealing, prior to varnish and urethane. For indoor use only.

SURFACE PREPARATION

  • Wait until the day after the application of the Art Béton Coating. After sanding the Art Béton Coating, clean the surface using a vacuum to get rid of any dust and particles.
  • APPLICATION

    • Apply sealer using a foam roller, use a paint brush for corners and edges. Apply a uniform layer, avoid bubbles. Do not leave streaks or excess sealer. The sealer must be completely dry before applying varnish. It should take 1 to 3 hours to dry. Use a fan to accelerate curing time.
    • IMPORTANT - The concrete will gradually absorb the sealer but not uniformly.
    • CLEANING Use a neutral soap with a pH of 7 to 9 while the sealer is sill fresh.
    IMPREGNATOR SEALER

    Surface: Needed for showers, sinks, outdoor, suitable for all surfaces.

    Coverage: 150 ft2 to 200 ft2

    Number of coats:: 1 coat required

    Tools: Brush, foam roller, paint tray, sand paper 120, 180 et 320

    CLEANING: Use neutral pH soap (7 to 9)

    Time before the next step: 8h

    Indoor/Outdoor The superior quality Art Béton water-based impregnator sealer penetrates the surface and fi lls the pores. It acts as a natural protector against water and oil. It produces a mild odour.

    APPLICATION

    • Can be used indoors and outdoors on all surfaces for a deep optimal sealing. It is the fi rst step of concrete sealing prior to varnish or urethane. Use at a temperature between 10 and 300 C.
    • SURFACE PREPARATION

      • Wait until the day after the application of the Art Béton Coating to make sure the surface is dry. Proceed to sand the surface using 150 grit sandpaper to soften rough edges and 180 grit for the rest. Use a 320-grit sandpaper for a smooth fi nish. Free the surface of any dust or particles using a vacuum.
      • APPLICATION

        • Apply the impregnator sealer using a foam paint roller. Apply a uniform layer, avoid streaks or bubbles. Do not leave excess sealer. Use a fan to accelerate curing time. Let it dry for 8 hours minimum before applying varnish or urethane.

        IMPORTANT : The impregnating sealer must be completely dry before applying VARNISH or Urethane (Step 4). 8 hour drying. Follow the directions provided by Art Béton for the rest of the procedures.

        WASHING: Use a neutral soap with a pH of 7 to 9.

        ** SHOWER AND OUTDOOR REQUIRED - SUITABLE FOR ALL SURFACES **


        GUARANTEE

        • Les Enduits Art Béton offers a guarantee for its Art Béton coating system. The warranty is applicable for one year from the date of purchase of the system. Les Enduits Art Béton undertakes to replace the products used if, and only if, the application is made in strict accordance with the attached specifications and on a perfectly stable basis.
        • Shelf life: 1 year after purchase
        • Protect products from freezing at all times
        • *ARTBÉTON COATING IS FLAME-RESISTANT. FOR USE ON A FIREPLACE WALL, IT MUST BE APPLIED TO FIBROCEMENT OR ANY OTHER FLAME-RESISTANT MATERIAL.

        Installation Guide (PDF)

        Price per square feet for project

        Fiche technique Scellant imprégnateur

        YOU ARE AT Step 3! :)
        Step 1 - primer Step 2 - decorative concrete Step 4 - varnish